|
This is a family of 4 different formulations,
EJ-321L,
EJ-321H,
EJ-321P,
and
EJ-321S,
all based on mineral oil.
The main difference between them is light output which varies
primarily by the percentage of mineral oil in the various solutions.
Other properties which vary with the light output are optical mean
free path, flash point, and hydrogen-to-carbon ratio.
They are recommended for use in large tanks including acrylic
tanks where lower costs are important.
|
|
|
The tendency for chemical action on container components runs in
parallel with the light output.
In the construction of acrylic tanks, it is strongly recommended
that only cell cast sheet stock, not extruded materials, be
employed.
Glue joints should be made with solvent action cements and should
be annealed afterward.
Extruded tubing has been successfuly used but only after the
inside walls of the cells had been passivated with a thin coating
of polyvinyl alcohol.
EJ-321P
may also be used in tanks fabricated with gray PVC plastic.
|
|
|
These liquids are normally packaged in 55 gallon
( 208 Liter ) drums, sealed under nitrogen.
Deliveries can also be made in 6000 gallon
( 20,000 Liter )
tankwagons and shipping containers.
|
